|
SHOCKTECH 2007 ION DOUBLE ROLLER BEARING TRIGGER
Sleek, curved CNC machined to exact specifications. Fully adjustable, micro switch actuator and travel stop positioning adjuster. Dual, caged roller bearing, first both roller bearings are press fitted into the trigger then sealed into place by a CNC machined 6061 aluminum cap. Guaranteeing a true alignment for your bearings to pivot on the trigger retention pin. Magnet or not to magnet? The choice is yours. We’ve cut a pocket so you can drop in your factory magnet if you prefer the performance it add’s. Don’t like it, simply push it out through the access hole and roll without it. True fit, easy installation, lifetime guarantee, 100% Made in America.
MSRP: $39.99 - Black, Silver, Red, Blue
|
|
SHOCKTECH NXT SHOCKER
Precision C.N.C milled with the flowing, somewhat understated lines Shocktech is famous for. Not gaudy and busy, overdone like so many others, yet rest assured you'll get the looks and soak in some compliments as you blow you competitors heads into the dirt.
Shoot ropes of precisely guided balls so fast and so accurately they'll need a ref (or a seeing eye dog) to walk 'em off the field.
The Shocktech NXT Shocker features:
+ All 6061 Aluminum CNC Construction. Far more durable, much cleaner anodizing.
+ Shocktech Double Roller Bearing Trigger
+ Break Beam Eyes
+ Freak Barrel System Standard or Your Choice of adding a Dye UL Barrel for a
$30.00 Upcharge
+ High Efficiency Bolt w/ Shocktech Trademark Bolt Face for Flow Control
+ Shocktech Design A.S.A
+ Shocktech On / Off Bottomline
+ Shocktech Drop #1
+ Shocktech In-Line Regulator
+ Shocktech Clamping Feed Neck
+ Shocktech Custom Feather Weight Milling
+ Shocktech Easy Off, Easy On Bolt Guide
+ Shocktech F.F.F Trigger Frame (Fat Fingers Friendly) It rocks if your normal or if you need to wear those "Oh Dear God I hope it Bounces Gloves" you keep in your bag.
MSRP: $1199.99 - Black, Silver, Red, Blue, Green
MSRP: $1299.99 - Camo
|
|
SHOCKTECH NXT SHOCKER DOUBLE ROLLER BEARING TRIGGER
First of our new generation of Roller Bearing Triggers. No more heavy duty look. Small, Thin, Light, Perfectly curved to fit your fingers the way you would expect a trigger on the world's fastest firing guns should fit.
MSRP: $34.99
|
|
SHOCKTECH NXT SHOCKER CLAMPING FEEDNECK
A little bit stronger than the previous generation Shocker Clamping Feed Necks (better threading). Less likely to break away from the gun. So now the feed neck stays on the gun, you may as well have the loader stay in the feed neck!
Shocktech Clamping Feed Necks are aluminum and virtually indestructible. A simple twist with an allen key or your fingers and you're literally chocking the life out of your loader! Don't worry about gracefully sliding behind a bunker, just attack, .....it's ok.
Shocktech the One Name for Clamping Feed Necks.
MSRP: $34.99
|
|
SHOCKTECH CAMO ION BODY KIT
We've got so much cool stuff on this thing we'll probably be paying royalties to 1/2 the companies in paintball and your grandma. We can't even figure out if we're making money on it, but it's just too slick not to sell!
Aircraft Aluminum construction, precise C.N.C machining. Bodies are available in Black, Silver, Blue, Red, Green, & Camo Colors with a Dust or Gloss Finish. Back Cap & Clamping Feed Neck ship the same color as the body.
All kits come with a quick release back cap for easy, one screw access to facilitate bolt removal. The bodies also include the proper banjo fitting to ease assembly and disassembly. Kit also includes pre-fitted hose, hose barb and extra o-rings.
* For a limited time we'll throw in a Shocktech Clamping Feed Neck at no additional charge.
When Performance is Not an Option, Look to One Name...Shocktech
MSRP: $164.99
|
|
SHOCKTECH SPLASH ION BODY KIT
We've got so much cool stuff on this thing we'll probably be paying royalties to 1/2 the companies in paintball and your grandma. We can't even figure out if we're making money on it, but it's just too slick not to sell!
Aircraft Aluminum construction, precise C.N.C machining. Bodies are available in Black, Silver, Blue, Red, Green, (Camo Colors Coming Soon! ) with a Dust or Gloss Finish. Back Cap & Clamping Feed Neck ship the same color as the body.
All kits come with a quick release back cap for easy, one screw access to facilitate bolt removal. The bodies also include the proper banjo fitting to ease assembly and disassembly. Kit also includes pre-fitted hose, hose barb and extra o-rings.
* For a limited time we'll throw in a Shocktech Clamping Feed Neck at no additional charge.
* Limited runs with limited colors to choose from. These kits also include a matching drop forward and bottomline.
When Performance is Not an Option, Look to One Name...Shocktech
MSRP: $199.99
|
|
SHOCKTECH CAMO HALO HOT ROD KIT
Not just a Drive Cone,...
A proven, bullet proof system to rebuild your loader making it better, stronger, faster, and now allows for more consistent feeding! Same rock solid performance, new look Urban Camo
One Name to Look to for the Best.
MSRP: $ 49.99 - Halo Hot Rod Kit
(1 Drive Cone, 1 Rip Drive Knob, 1 Anti-Jam Spring, 1 Speed Wheel, 1 Spring Cup, 1 Two-Piece Rip Drive Stem, 1 Clip)
|
|
THE BADLANDZ PAINTBALLZ
This is the official practice paint for the Chicago Aftershock as well as many Midwest teams: Voltage, Thunderstruck, Chi-Town Raiders, Shock Kidz, Sudden Death, Never.. All shoot Badlandz Paint. There are more teams than we can list here that prefer the reliable and consistent quality. Not to mention saving some cash. Of course all these teams shoot an upper level ball for there competitions, but that is not what this paint was designed for. Any gun, most weather conditions from high temp's along with the high humidity we have here in the midwest. Down to the heavy duty winters.
We asked PMI to manufacture a very specific shell / fill type for us and they responded perfectly. So here you go, offered for the first time outside of our field / stores. Try a case you won't be disappointed and you will save a few bucks!
|
|
SHOCKTECH / BBT / BADLANDZ - NEW 2006 T-SHIRTS!
All shirts are printed on heavy weight cotton shirts to ensure they last as long as possible, and still remain comfortable. Be sure to check out all of the new designs. Also be sure to check back for updates as we will be adding new designs all the time!
|
|
SHOCKTECH - ION GUN BODY KIT
We've got so much cool stuff on this thing we'll probably be paying royalties to 1/2 the companies in paintball and your grandma. We can't even figure out if we're making money on it, but it's just too slick not to sell!
Aircraft Aluminum construction, precise C.N.C machining. Bodies are available in Black, Silver, Blue, Red, Green, (Camo Colors Coming Soon! ) with a Dust or Gloss Finish. Back Cap & Clamping Feed Neck ship the same color as the body.
All kits come with a quick release back cap for easy, one screw access to facilitate bolt removal. The bodies also include the proper banjo fitting to ease assembly and disassembly. Kit also includes pre-fitted hose, hose barb and extra o-rings.
* For a limited time we'll throw in a Shocktech Clamping Feed Neck at no additional charge.
When Performance is Not an Option, Look to One Name...Shocktech
MSRP: $149.99
 |
|
SHOCKTECH - ION SUPERFLY BOLT
Strong, Light Weight, Gas Efficient, All in a package that Delivers Consistent Performance over the Chronograph.
All aftermarket Ion bolts weigh less than stock. Ours is no exception. Many sacrifice durability to gain this weight advantage, we didn't. Turned from a single piece of 6061 Aluminum (The Good Stuff), No Glue, No Press Fit, ONE SOLID PIECE. Carved out air chamber to allow for the increase of air storage in the Ion fire chamber, giving your gun the ability to run on a lower operating pressure with no "Shoot Down". Dual O-Rings on the bolt tail allows the firing chamber to be sealed off as the gun fires, thereby increasing efficiency. (This technology is under license from Dye ).
Prior to releasing this bolt we tested every bolt we could get our hands on. Some were good, some not, but one thing we kept noticing is they were all over the place when it came to generating consistent velocity groupings. A really bad thing if you play tournaments or like to shoot and be accurate. So we played with the internal air passages until we found the configuration that facilitated the right chrono groups, we felt our product needed before we would sell you one.
Less Kick! Greater Efficiency! Strong Chrono Performance! One Name....Shocktech
MSRP: $54.99
|
|
SHOCKTECH DM6 EYE PLATE ADAPTOR
No more supergluing o-rings in your top end gun. Custom machined from 6061 aluminum and high gloss anodized blue. These little babies will line your eyes perfectly in the bore and hold ‘em there for good! The right accessory if your installing an aftermarket set of eyes in your DM or looking to remove the self-cleaning style eyes and go back to the stock Dye Dm5 type.
MSRP: $19.99 - Available in Blue Only.
|
|
SHOCKTECH - CHICAGO AFTERSHOCK DM6
+ Extremely Limited Production
+ Setup Exactly as each Aftershock Player Uses It.
+ Built to Survive the Rigors of the worlds toughest
Paintball League.... The NXL.
+ Blue Gun with Black Accents
+ Shocktech Clamping Feed Neck
+ Shocktech On / Off Bottomline OR Pro Bottomline
+ Shocktech Drop Forward #1 or Drop # 0
*Other Drops available upon Request+ Shocktech In-Line Regulator
+ Shocktech Modified Eyes, machined aluminum eye
positioning shims to perfectly align the DM5 Series Eyes
and Replace the DM6 Self Cleaning Eye System
+ DM6 Virtue Board
+ Lazer Engraved Chicago Aftershock Logo
+ Dye .692 UltraLight Barrel
+ Stickers, T-Shirt, Head Wrap
For NO extra charge, but additional wait period required; You can pick any rostered Aftershock player you like and he’ll USE THE GUN IN AN NXL MATCH AND TURN IT OVER OR SHIP IT TO YOU AS SOON AS THE GAME IS OVER!!! Not Only will you know you’ve just purchased an authentic, proven, battle test gun, but you're that much closer to your favorite player! Certificate of Authenticity Included. *Pre-Pay of order Required.
MSRP: $1499.99
|
|
SHOCKTECH EGO CLAMPING FEED NECK
Not much room to improve on one of the best guns made, but we're gonna try! Tools optional death grip on your loader. You can use an allen wrench for that last little bit, but not necessary. Delrin internal sleeve so the clamp will allow the loader some room to rotate, should you have one of those teeth rattling falls, while not snapping the feed neck. Not only does the Delrin Sleeve help save the loader and feednecks, but it'll stop the set screws from scratching your gun. Dust Finish to match your gun and of course a Lifetime / 100% Made in the USA guarantee.
MSRP: $34.99
|
|
SHOCKTECH GAS THRU GRIP - NEW 2006 DESIGN !
Sick of feeling like you've got a baseball bat cut down and stuck to the front of your gun? Not anymore! Our sleek ergonomic design allows you to get a grip even when the gun manufacturer puts the A.S.A right up against the trigger guard.
Available in Silver, Black, Blue, Red and Green.
2005 and 2006 Designs are both available!
MSRP: $24.99
|
|
SHOCKTECH HALO HOT ROD KIT
Not just a Drive Cone,...
A proven, bullet proof system to rebuild your loader making it better, stronger, faster, and now allows for more consistent feeding!
One Name to Look to for the Best.
MSRP: $ 49.99 - Halo Hot Rod Kit
(1 Drive Cone, 1 Rip Drive Knob, 1 Anti-Jam Spring, 1 Speed Wheel, 1 Spring Cup, 1 Two-Piece Rip Drive Stem, 1 Clip)
MSRP: $ 24.99 - Drive Cone Only
< View Now >
|
|
SHOCKTECH HALO RIP DRIVE KNOB
The Shocktech Rip Drive Knob. Buy ours, cause it's better than "theirs".
MSRP: $ 19.99
|
|
BOTTOMLINE COMBO KITS
MORE VARIATIONS THAN ANYONE! LITERALLY THOUSANDS OF COMBINATIONS!
Drop Forwards and Bottomlines.... Every gun's got one, or every gun needs one! No reason to settle for sub-standard quality , improper sizing , and looks DO count!
Shocktech offers 6 sizes of Drop Forwards and 3 different Bottomlines, 5 Colors to choose from, along with a Gloss or Dust Finish!
Feel free to mix and match to make any combo package you'd like! There are litterally thousands of variations. We've pictured several of our most popular setups, so you can have an idea of what yours will look like. Don't let what you see hold you back from designing your own unique custom look!
We'll build to order, Just for You!
3- Hole Combo - MSRP: $34.99
Pro Combo - MSRP: $39.99
On / Off Combo - MSRP: $49.99
|
|
SHOCKER GUN BODY KIT
Kit Includes: 1 Shocktech Milled Body, 1 Shocktech Grip Frame, 1 Shocktech Roller Bearing Trigger, 1 Shocktech Snatch Grip, 1 Shocktech Drop Forward, 1 Shocktech On/Off Bottomline, 1 Shocktech Clamping Feed Neck, 1 Shocktech A.S.A.
- View the Shocker F.A.Q Page ?
MSRP: $499.99
|
|
ON / OFF BOTTOMLINE COMBO
Our traditional style bottomline. Now packaged together with the grip frame mounting screws and 2 - 1/8" N.P.T Pipe Plugs. The Shocktech Self Bleeding On / Off Bottom Line is light and compact. Designed to slide into a dovetail mounting system. It comes pre-drilled and tapped in 2 locations to make it easy to attach your hoses, fittings or gauges. The Bottom Line includes one plug for the unused air exit holes. Your choice of any drop forward, any color, dust or gloss finish.
MSRP: $49.99
|
|
PRO BOTTOMLINE COMBO
Our new Pro Bottomline. The smallest, lightest bottomline style a.s.a we have made yet. Simple yet stylish milling, one single exit port pre-assembled with a macroline coupler. No on/off means no o-rings to go bad when you least expect it. Double cut dove tail like all our bottomlines afforrds you the confidence to crash just as hard as you'd like and know that you'll never lose the drop forward / bottomline connection.
MSRP: $39.99
|
|
3 HOLE BOTTOMLINE COMBO
Our 3 Hole Bottomline Combo. Now packaged together with the grip frame mounting screws and 2 - 1/8" N.P.T Pipe Plugs. The bottomline is tapped for 3 gas exit holes, so you can find the hose configuration most comfortable for your shooting position. Then plug the other two holes or screw in a gauge if you like. Your choice of any drop forward, any color, dust or gloss finish.
MSRP: $34.99
|
|
Shocktech Products
