(+1) 208 127412


kebidu 433MHZ Copy Remote Control Auto 4 Channe Code Garage Gate Door Opener Remote Control Duplicator Cloning Code Car Key


Buy Now Compare
Availability: 472608 in stock

kebidu 433MHZ CAME Copy Remote Control Auto 4 Channe Code Garage Gate Door Opener Remote Control Duplicator Cloning Code Car Key

Dear customer,

thank you very much for your support! We will arrange the shipment within 3 days after your payment, if there is any problem in the middle, we will contact you as soon as possible. If you find any quality problems after receiving the product, don’t rush to give us a bad review, you can contact our customer service as soon as possible, we will serve you wholeheartedly, and finally wish us a happy cooperation!

Owner: KS Store


Material: Plastic.

Color: As pictures show.

Type: Wireless remote.

For: Such as electric telescopic door remote control, road gate remote control, alarm remote control and so on.

Rated voltage: 12V 27A Battery(included).

Wireless transmission distance: 50-150 (m). (open space)


Multi-functional and multi-variable, personalized and user-friendly simple design and fast to use.

This smart copy remote control is suitable for electric door remote control, telescopic door remote control, garage door remote control.

Cloning chip types:

2260(PT2260,SC2260,LX2260,HX2260); 2262,(PT2262,SC2262,LX2262,HS2262,HX2262),PT2264,PT2240(LX2240),1527( EV1527,HS1527,HX1527 ),FP527,CS5211,SMC918,SMC926,AX5026,AX5326-3,AX5326-4,HT600,HT680,HT6207,HT6010,HT6012,HT6013,HT6014,HT12D, HT46F49E, PIC16F629,PIC16F630 and so on. Different chip manufacturers have different prefixes chip model, as long as the digital portion of the chip can be the same model.

Note: We usually do not recommend copying a rolling code chip, because there are many uncertainties when copying a rolling code chip. When copying a rolling code chip remote control, it is not possible to determine whether the original remote control chip is an encryption chip. Therefore, we do not recommend copying the rolling code remote control.

Use steps:

1. Clear code: two fingers at the same time hold the unlock key and lock key; the LED light rapidly flashes 3 times in about 2 seconds; let one of the fingers go (the other hand cannot let go), and then use the loose finger to quickly click three times on the loose button until the LED light flashes quickly; the two fingers can release; then press any one key of the remote control; when LED light goes off, it means clear code is successful(four keys all empty); if after you press any button of the remote control, the light is still on, it indicates that the original code has not been cleared successfully. You need to re-clear, and only successfully clearing the code can cloning be successful. You can repeatedly clear and clone the code.

2. Copy: left hand taking the original remote control, right hand taking our cloned remote control and keep two remote control as close as possible; press the first keys of two remote controls at the same time; in about 2 seconds, the LED light will flash quickly 2 times; after one second, the indicator light keeps flashing and let go of your fingers; and then press the key after successful study, the light keeps on, which means that the first key code on original remote control has been copied to the other remote control; the same method can be used in turn on the second key, the third key… If the copy is successful, the remote control function is the same as the original matching remote control.

3. Restore: When you accidentally clear the copy of the remote control code, you can simultaneously press the copy of the remote control of the bottom two keys, LED lights will flash quickly, let go after pressing any key, light long, this Indicating that the code for the remote control is restored. Before using our copy remote control, please be sure to remove the existing code from the remote control.

4. How to deal with the situation where some of the keys can control, the rest cannot control? You can use clear and restore operation, the specific operation is as follows:

(1) first clear code;

(2) after clearing code, copy the unsuccessful key again, and there is no need to copy the rest buttons;

(3) and then clear the code again;

(4) restore code; at this time, the original keys that were not successfully copied are now covered by new codes, and the original keys that were successfully copied are now retained. If there is no copy after the second copy of the keys, repeat the above steps again and again until all keys are successfully copied.


1. Select the remote control of the prerequisite: the original remote control function is normal, remote control chip is the same or compatible, remote control operating frequency the same.

2. The remote control can only copy the fixed code, learn the code chip and part of the single-chip remote control (can copy the chip model see copyable chip type).

3. Two-way remote control, rolling code remote control, single-chip encryption program remote control cannot be copied. Such as HCS200, HCS201, HCS300, HCS301 and so on.

4. Before copying the remote control, make sure that the existing code on the remote control has been cleared and check that the code is cleared successfully. Otherwise, it cannot be copied.

5. Please ensure that your remote control has enough power, the distance between the two remote control the better! If the copy distance is too close to the switch at different angles to copy. Press and hold the button on the original remote control to send the signal completely normal, and then press the button on the remote control to ensure that the function is completely copied.

Package included:

1 * 433MHZ remote control duplicator.


1. Please allow 1-3mm differs due to manual measurement.

2. Due to the different display and different light, the picture may not show the actual color of the item. Thanks for your understanding.

Brand Name






Wireless Communication


Support APP





433 MHz





Model Number

Remote Control 433MHz


433MHZ remote control duplicator

14 reviews for kebidu 433MHZ Copy Remote Control Auto 4 Channe Code Garage Gate Door Opener Remote Control Duplicator Cloning Code Car Key

    May 20, 2022
    Works with my garage, But only the first time that I copy the knob. I guess it will be key rotary or something
    May 14, 2022
    Very good furniture product But not working with any Remote garage
    March 27, 2022
    Very good product, meet my needs, only desconfigurou key nothing after a time use. But am quite pleased.
    February 21, 2022
    Works well. It's easy to program. One minus for opening and closing the gate need to program different buttons, with one does not work.
    February 19, 2022
    Product is much better than I expect. Quality is good and works well.
    AliExpress Shopper
    February 17, 2022
    It was completely ok Fast Delivery Fully works as it should Grtjs JPS
    February 8, 2022
    Sender did not put my phone number on the package. Therefore the delivery company was not able to deliver it. I had to contact the delivery company and provide my phone number. After that the package was successfully delivered. Remote control works like a charm. Thank you.
    February 3, 2022
    Works well, but lack of explanation. No instructions
    January 29, 2022
    Quick shipping and great item. Highly recommended
    January 28, 2022
    The remote was as described but still not been able to make it work with the remote I bought to copy
    AliExpress Shopper
    January 11, 2022
    Got it right, control perfectly fulfills the purpose of copy up to 4 different signals.
    January 9, 2022
    Difficult to program, not very clear explanations
    January 9, 2022
    December 26, 2021
    Product conforms to its description and delivery on time ..... Serious seller
Add a review
Review now to get coupon!

Your email address will not be published.

Back to Top
Product has been added to your cart